- Home
- ยป
- Our Products
- »
- Nickel Alloy
Nickel Alloy
625 Inconel Round Bar
Minimum Order Quantity: 10 Kg
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Product material : | Nickel Alloys |
Product Grade : | Inconel 625 |
Country of Origin | Made in India |
3 mm to 100 mm (3/16 inch – 4 inch) |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
2 metres to 6 metres |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Magnetic Particle Inspection (MPI) |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 718 Round Bar
Minimum Order Quantity: 10 Kg
Product material : | Nickel Alloys |
Product Grade : | Inconel 718 |
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Country of Origin | Made in India |
Size range |
3 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 825 Round Bar Uns N08825
Product Material | Nickel Alloys |
Available Diameter | 3 mm to 200 mm |
Product Application | : Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Product Grade | Inconel 825 |
Country of Origin | Made in India |
5 mm to 100 mm (3/16 inch – 4 inch) |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
2 metres to 6 metres |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Magnetic Particle Inspection (MPI) |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 625 Round Bar Supplier In Ahmedabad
Product material : | Nickel Alloys |
Product Grade : | Inconel 625 |
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Country of Origin | Made in India |
Size range | 3 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances | h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length | 2 metres to 6 metres |
Chamfering | Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test | Magnetic Particle Inspection (MPI) |
Ultrasonic Test | 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance | Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness | Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish | Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment | Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 825 Round Bar Uns N08825
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Product material : | Nickel Alloys |
Product Grade : | Inconel 825 |
Country of Origin | Made in India |
Size range | 3mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances | h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length | 2 metres to 6 metres |
Chamfering | Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test | Magnetic Particle Inspection (MPI) |
Ultrasonic Test | 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance | Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness | Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish | Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment | Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
SS Wire INCONEL 625
Minimum Order Quantity: 10 Kg
Product Grade | Inconel 625 |
Product Application: | Balls, Conveyor Belts, Fasteners, Fencing, Filters, Hangers, Lashing, Nails, Ki |
Product material : | Stainless Steel |
Available Diameter : | 0.70 mm - 22 mm |
Country of Origin | Made in India |
Size range |
0.70 mm – 22 mm |
Temper |
Soft, |
Finish |
EPQ, |
Coil Weights |
1 Kg – 1200 Kgs |
Grades |
Austenitic |
Packaging |
Spools Plastic/ Metal, Drums, Bare Coils, Carrier, Reels Plastic/Wooden, Euro Coil( Acro Pack), Handi Pack |
Hastelloy C276 Sheets
Minimum Order Quantity: 10 Kg
Product material : | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product Grade : | Hastelloy C22 |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 625 Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Steel Grade | Product Grade : |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product Grade : | Inconel 625 Plate |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Nickel Alloy Coil
Width | 800 to 1300 mm |
Working Temperature | 1 to 80 deg C |
Tensile Strength | 926 MPa |
Resistance | 392 micro Ohm |
Material | Nickel |
Thickness | 2 to 10 mm |
Surface Treatment | Galvanized |
Features:
- High strength
- Simple installation
- Strong design
SS Wire HASTELLOY C276
Minimum Order Quantity: 10 Kg
Grade | Hastelloy C276 |
Material | Stainless Steel |
Thickness | 0.7mm to 22mm |
Product Application | Balls, Conveyor Belts, Fasteners, Fencing, Filters, Hangers, Lashing, Nails, Kitchen Appliances, |
Country of Origin | Made in India |
Size range |
0.70 mm – 22 mm |
Temper |
Soft, |
Finish |
EPQ, |
Coil Weights |
1 Kg – 1200 Kgs |
Grades |
Austenitic |
Packaging |
Spools Plastic/ Metal, Drums, Bare Coils, Carrier, Reels Plastic/Wooden, Euro Coil( Acro Pack), Handi Pack |
Monel K400 Round Bars
Minimum Order Quantity: 10 Kg
Product Material | Nickel Alloys |
Available Diameter | 5 mm to 100 mm |
Product Application | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Product Grade | Monel K400 |
Country of Origin | Made in India |
Size range |
5 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Monel K 500 Round Bar
Minimum Order Quantity: 10 Kg
Product Grade | Monel K 500 |
Product Material | Nickel Alloys |
Available Diameter | 3 mm to 200 mm |
Product Application | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Country of Origin | Made in India |
Size range |
5 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Monel Alloy K500 Round Bars
Minimum Order Quantity: 10 Kg
Product Grade | Monel K 500 |
Product Material | Nickel Alloys |
Available Diameter | 5 mm to 100 mm |
Product Application | : Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Country of Origin | Made in India |
Size range |
5 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Hastelloy Round Bars C276
Minimum Order Quantity: 10 Kg
Product Application | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Product Grade | Hastelloy C276 |
Product Material | Nickel Alloys |
Available Diameter | 3 mm to 200 mm |
Country of Origin | Made in India |
Size range |
5 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Monel 400 Plate
Minimum Order Quantity: 10 Kg
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product material : | Monel |
Product Grade : | Monel 400 |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Monel Alloy 400 Plate
Minimum Order Quantity: 10 Kg
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product material : | Monel |
Product Grade : | Monel Alloy 300 Plate |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
C77600 Nickel Silver Brass
Shape | Round |
Usage/Application | Industrial |
Technique | Cold Rolled |
Brand | Elite Alloys |
Grade | C77600 |
Surface Treatment | Powder Coated |
Material | Nickel Silver Brass |
Applications:
- Industrial: Decorative Molding, Elevator Sills, Hardware, Architectural
Chemical Composition:
- | Cu | Fe | Pb | Sn | Zn | Ni | Mn |
Min/Max | 42-45 | 0-.20 | 0-.25 | 0-.15 | Rem | 12 14 | 0-.25 |
Mechanical Properties:
Form | Temper Code | Tensile Strength (ksi) | Elongation (%) | Rockwell B scale | YS-0.2% Offset |
Extrusions | M30 | 91 Typ | 30 Typ | 83 Typ | 47 Typ |
Sizes Available:
Hollow Rods | Min Bore Size 20 mm and Max OD 100 mm |
Round Rods/Bars | 6mm To 130 mm |
Wires | 1mm To 8mm |
Hex | 5mm To 60mm |
Square | 4mm To 60mm |
Flat | 5mm Min Thickness and max Width 120mm |
Profiles / Sections | AS per Customer Drawing |
Billets | Up to 200 mm |
Ingots | AS per Specification |
Nickel Alloy Bar
Material | Nickel Alloy |
Surface Treatment | Bright Annealed |
Shape | Round |
Tensile Strength | 965 MPa |
Single Piece Length | 3 meter, 18 meter |
Usage/Application | Construction |
Nickel Alloy Sheet
Width | 1000 to 2000 mm |
Thickness | 0.3 - 80 mm |
Length | 2000 - 6000 mm |
Material | Stainless Steel |
Technique | Hot Rolled / Cold Rolled |
We are highly indulged in the process of supplying to our customers a wide range of metal products and here in we are offering Nickel Alloy Sheets & Plates. These plates have been given a standard composition in order to make them useful for the industrial processes. Customers can easily avail these from us as per the requirement in comprehensive and market leading price range.
Metal grades of this range:
- ASTM / ASME SB 162 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201)
- ASTM / ASME SB 127UNS 4400 (MONEL 400)
- ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
- ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601)
- ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
- ASTM / ASME SB 574 UNS 10276 (HASTELLOY C 276)
- ASTM / ASME SB 462 UNS 8020 (ALLOY 20 / 20 CB 3)
Nickel Alloy Flanges
Material | Nickel Alloy |
Density | 8.902 gm/cc |
Melting Point | 1453 Deg C |
Heat of Fusion | 4.20 Cal/gm mole |
Shape | Round |
Nickel Alloy Wire
Work Temperature | -1 to 80 deg C |
Material | Nickel Alloy |
Diameter | 0.025 - 10 mm |
Size | 0.0254 - 10.0 mm |
Surface Treatment | Bright Annealed |
Our expertise has enabled us to offer a comprehensive range of grade Nickel Alloy Wire to the clients. Procured from the certified vendors of the market, these pure nickel is processed using highly advanced machinery and latest technology. Furthermore, this pure nickel is available with us at industry leading prices.
Features:
- Longer service life
- Corrosion & abrasion resistant
- Purity
Nickle Alloy Bars
Tensile Strength | 965 MPa |
Work Temperature | -1 to 80 deg C |
Material | Nickel Alloy |
Single Piece Length | 3 meter, 6 meter |
Usage/Application | Construction |
Nickel Silver Brass Bars C77400
Single Piece Length | 6 meter |
Usage | Construction |
Brand | Elite Alloys |
Color | Silver |
Applications:
- Architecture: Elevator Trim, Handrails, Thresholds
Chemical Composition:
- | Cu | Pb | Zn | Ni |
Min/Max | 43.0-47.0 | 0-.09 | Rem | 9.0-11.0 |
Physical Properties:
Densitylb/cu in. at 68°F | 0.306 | 16.2 · 10 6? per °C (20-300 C) |
Specific Gravity | 8.47 | 7.89 gm/cm3 at 20 C |
Applicable Specifications:
Form | System | Standard | Description |
Bar | ASTM | B124 | Copper And Copper-alloy Forging Rod, Bar And Shapes |
Die | ASTM | B283 | Copper And Copper Alloy Die Forgings (hot Pressed) |
Rod | ASTM | B124 | Copper And Copper-alloy Forging Rod, Bar And Shapes |
Shapes | ASTM | B124 | Copper And Copper-alloy Forging Rod, Bar And Shapes |
Sizes Available:
Hollow Rods | Min Bore Size 20 mm and Max OD 100 mm |
Round Rods/Bars | 6mm To 130 mm |
Wires | 1mm To 8mm |
Hex | 5mm To 60mm |
Square | 4mm To 60mm |
Flat | 5mm Min Thickness and max Width 120mm |
Profiles / Sections | AS per Customer Drawing |
Billets | Up to 200 mm |
Ingots | AS per Specification |