- Home
- ยป
- Our Products
- »
- Inconel Alloy
Inconel Alloy
Astm B408 Inconel 800ht Round Bars
Minimum Order Quantity: 10 Kg
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Product material : | Nickel Alloys |
Product Grade | Inconel 800ht |
Country of Origin | Made in India |
3 mm to 100 mm (3/16 inch – 4 inch) |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
2 metres to 6 metres |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Magnetic Particle Inspection (MPI) |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 625 Round Bar Supplier In Ahmedabad
Product Application | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Material: | Nickel Alloys |
Product Grade | Inconel 625 |
Available Diameter | 3 mm - 200 mm |
Country of Origin | Made in India |
5 mm to 100 mm (3/16 inch – 4 inch) |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
2 metres to 6 metres |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Magnetic Particle Inspection (MPI) |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Uns N06625 Inconel 625 Round Bar
Product Application : | Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemi |
Available Diameter : | 3 mm to 200 mm |
Product material : | Nickel Alloys |
Product Grade : | Inconel 625 |
Country of Origin | Made in India |
Size range | 3 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances | h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length | 2 metres to 6 metres |
Chamfering | Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test | Magnetic Particle Inspection (MPI) |
Ultrasonic Test | 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance | Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness | Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish | Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment | Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 625 Rod
Working Temperature | 1 to 80 deg C |
Shape | Round |
Grade | 625 Series |
Usage/Application | Construction |
Surface Treatment | Galvanized |
Resistance | 1.37 micro Ohm |
Features:
- Flawless finish
- Optimum strength
- Non-corrosive
Inconel 625 Round Bar
Working Temperature | 1 to 80 deg C |
Single Piece Length | 6 meter |
Material | Inconel Alloy |
Grade | 625 Series |
Usage/Application | Construction |
Tensile Strength | 724 MPa |
Surface Treatment | Galvanized |
800HT Inconel Rod
Single Piece Length | 3 meter |
Material | Inconel Alloy |
Shape | Round |
Grade | 800 HT |
Working Temperature | 1 to 65 deg C |
Surface Treatment | Galvanized |
Features:
- Non-corrosive
- High tensile strength
- Abrasion resistance
Note: We also provide Bar, Sheet, Round Bar, Flange, Wire etc
Inconel 718 Rod
Single Piece Length | 3 meter |
Material | Inconel |
Shape | Round |
Material Grade | 718 Series |
Tensile Strength | 750 MPa |
Surface Treatment | Bright Annealed |
Note: We also provide Bar, Fitting, Plates, Round Bar, Sheets, Bolt, Wires etc
SS Wire INCONEL 718
Minimum Order Quantity: 10 Kg
Product Application: | Balls, Conveyor Belts, Fasteners, Fencing, Filters, Hangers, Lashing, Nails, Ki |
Country of Origin - | Made in India |
Product Grade : | Inconel 718 |
Product material : | Stainless Steel |
Available Diameter : | 0.70 mm - 22 mm |
Country of Origin | Made in India |
Size range |
0.70 mm – 22 mm |
Temper |
Soft, |
Finish |
EPQ, |
Coil Weights |
1 Kg – 1200 Kgs |
Grades |
Austenitic |
Packaging |
Spools Plastic/ Metal, Drums, Bare Coils, Carrier, Reels Plastic/Wooden, Euro Coil( Acro Pack), Handi Pack |
718 Inconel Sheet
Minimum Order Quantity: 10 Kg
Material Grade | INCONEL 718 |
Material | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Product Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceuticals, Refining. |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 800h Sheets
Minimum Order Quantity: 10 Kg
Material | Nickel Alloys |
Product Grade : | Inconel 800h |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
825 Inconel Sheet
Minimum Order Quantity: 10 Kg
Material | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product Grade : | Inconel 825 |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
718 Inconel Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product material : | Inconel |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 800 Plates Uns N08800
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Steel Grade | 800 Inconel |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 800 Ht Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Product material : | inconel |
Product Grade : | 800ht |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 800h Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Product material : | Inconel |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 825 Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product material : | Inconel |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
825 Inconel Plate
Minimum Order Quantity: 10 Kg
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product Material: | inconel |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Astm B162 Asme Sb162 Inconel 625 Sheets
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product Grade : | Inconel 625 |
Product material : | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Astm B162 And Asme Sb162 Inconel 800 Sheets
Material Grade | INCONEL 800 |
Material | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 825 Plate Uns N08825
Plate Type | Inconel Plate |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product material : | Inconel 825 |
Country of Origin | Made in India |
Size range | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades | 304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards | ASTM A240 / ASME SA240 |
Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test | Magnetic Particle Inspection (MPI) |
Finish | Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms | Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 718 Sheets And Plates
Material Grade | INCONEL 718 |
Shape | Rectangle |
Usage/Application | Industry |
Available Thickness : | 0.25-200mm |
Product material | Inconel |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Country of Origin | Made in India |
Size range | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades | 304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards | ASTM A240 / ASME SA240 |
Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test | Magnetic Particle Inspection (MPI) |
Finish | Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms | Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 625 Flange
Working Temperature | 1 to 80 deg C |
Material | Inconel Alloy |
Grade | 625 Series |
Tensile Strength | 724 MPa |
Surface Treatment | Galvanized |
Inconel 718 Nickel Alloy Coil
Usage/Application | Automobile Industry |
Brand | Imported |
Thickness | 2 to 6 mm |
Color | Silver |
Width | 800 to 1200 mm |
Length | 30 to 40 meter |
Material Grade | 718 Series |
Material | Nickel Alloy |
Country of Origin | Made in India |
Inconel 718 Bar:
- Inconel 718 bars can be cut to any size to meet your fabrication and design needs. The Inconel bars are a popular choice among many industries; they are used in hot extrusion tools and components for example casings, bolts, fasteners and equipment parts. Inconel 718 bars and rods are widely used in turbines, rocket fuel components, combustion engine components, and wellhead parts etc. Other Inconel grades available in bar forms are Inconel 600 bar, Inconel 601 bar and 625 bar.
Inconel 718 Plate:
- Inconel 718 plate is developed in specifications - widths up to 1500mm and lengths up to 3000mm. Inconel alloy 718 plates delivered by us are accepted by customers in the various industrial sectors such as paper, sugar, textile, engineering, oil and gas, petrochemical plants and fertilizers, power production and nuclear industry. With the experience of decades in supplying superb Metal Inconel 718 plate, we offer the high quality, economical and the best performance products. The whole processing is governed by our regularly audited units.
Inconel 718 Applications:
- Aerospace/aeronautics engineering, rocket motors, thrust reversing devices, marine, chemical treatment units, pressure vessels, pollution control systems and nuclear power production reactions, cryogenic storage containers, high strength bolts and hot extrusion tools, turbine engines, fasteners, fuel and exhaust systems.
- Inconel grades are fit for use in the production of components that are employed in the severe environments such as turbocharger rotors & seals, motor shafts for electric submersible well pump, steam generators, tubes for heat exchangers, firearm sound suppressor blast baffles and in machine guns, black box recorders in aeroplanes etc.
Inconel 825 Bolts
Head Shape | Hex |
Material Grade | 825 Series |
Surface Finish | Galvanized |
Material | Nickel-Chromium Alloy |
Surface Treatment | Bright Annealed |
Resistant Temperature | 1300 deg F |
Features:
- Accurate dimensions
- Strong structure
- Corrosion resistance
Note: We also provide Bar, Rods, Sheets, Fitting, Plate, Wire etc
Inconel 925 Bolt
Length | 3 inch |
Material Grade | 925 Series |
Surface Treatment | Bright Annealed |
Resistant Temperature | 2150 deg F |
Tensile Strength | 865 MPa |
Features:
- Resistant to corrosion
- Durable finish
- Optimum strength
Note: We also provide Rods, Sheets, Plates, Fitting, Flanges, Bars etc
Inconel X750 Sheet
Width | 800 to 1200 mm |
Material | Nickel-Chromium Alloy |
Shape | Rectangle |
Material Grade | X 750 Series |
Tensile Strength | 965 MPa |
Work Temperature | -1 to 80 deg C |
Note: We also provide Rod, Wire, Bars, Spring Wire, Bolts, Plates, Sheet etc
Inconel 825 Nickel Alloy Coil
Thickness | 2 to 5 mm |
Material Grade | 825 Series |
Length | 100 m |
Width | 700 to 1100 mm |
Material | Nickel Alloy |
Most of the Incoloy family of alloys, Incoloy 825 has a unique chemical composition which includes:
- Ni 38-46%
- Fe 22% min
- Cr 19-23.5%
- Mo 2.5-3.5%
- Cu 1.5-3%
- Mn 1% max
- Ti 0.6-1.2%
Inconel 625 Wire
Material | Inconel Alloy |
Length | 10 to 30 meter |
Grade | 625 Series |
Surface Treatment | Galvanized |
Inconel 625 Sheets
Minimum Order Quantity: 10 Kg
Product Grade : | Inconel 625 |
Product material | Nickel Alloys |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Nickel Alloy Sheets Inconel 718
Minimum Order Quantity: 10 Kg
Composition | Inconel 718 |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Product Material | Nickel Alloys |
Country of Origin | Made in India |
Size range |
1000mm, 1250mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 625 Sheets And Plates
Minimum Order Quantity: 10 Kg
Usage/Application | Industry |
Product Grade : | inconel 625 |
Product material : | Stainless Steel / duplex/ |
Available Thickness : | 0.25-200mm |
Product Application : | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
Country of Origin | Made in India |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Ams 5659 Cres 15 5 Ph Flat Plate
Minimum Order Quantity: 10 Kg
Material Grade | SS 15 5Ph |
Material | Stainless Steel |
Shape | Rectangular |
Usage/Application | Used for Automotive Industry, Oil & Gas, Pulp & Paper, Construction, Pharmaceu |
I Deal In | New Only |
Available Thickness : | 0.25-200mm |
Product material : | Stainless Steel |
Country of Origin | Made in India |
|
Inconel 625 Round Bar
Product Material | Nickel Alloys |
Available Diameter | 3 mm to 200 mm |
Product Application | : Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food |
Product Grade | Inconel 625 |
Country of Origin | Made in India |
Size range |
5 mm to 100 mm (3/16 inch – 4 inch) |
Size Tolerances |
h9, h10, h11, k12, k13, A-484, EN-10060, DIN-1013 etc. |
Length |
2 metres to 6 metres |
Chamfering |
Available in 30° to 60° through fully automatic both-end chamfering machine |
Crack Test |
Magnetic Particle Inspection (MPI) |
Ultrasonic Test |
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance |
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Straightness |
Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Surface Finish |
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment |
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/Double Tempering |
Inconel 625 Pipe Fitting
Head Shape | Round |
Size | 1/2-18 inch |
Material | Inconel Alloy |
Grade | 625 Series |
Surface Treatment | Galvanized |
Features:
- High strength
- Smooth Finish
- Easy to fit
Metal Grades:
- Inconel 600
- Inconel 601
- Inconel 625
- Incoloy 718
- Inconel X-750
- Incoloy 800H
- Incoloy 800HT
- Incoloy 825
- Incoloy 901
- Incoloy 926
Inconel 625 Fitting
Size | 1-2 inch |
Material | Inconel Alloy |
Connection | Male |
Grade | 625 Series |
Working Temperature | 1 to 60 deg C |
Surface Treatment | Galvanized |
Tensile Strength | 724 MPa |
Our company offers leak-free connections for oil, chemical, processing plants, petrochemical, gas and power generation industries. Our offered Inconel 625 Fitting is known for its high temperature and pressure resistance, corrosion resistant, high tensile strength, easy installation and durability. Tested on industry parameters, a product of our company is hugely recognized among the clients.
Features:
- Cost-effective
- Quality assured
- High in demand
Inconel 625 Sheet
Surface Treatment | Galvanized |
Shape | Rectangle |
Grade | 625 Series |
Thickness | 63 mm |
Material | Inconel Alloy |
Size range |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Width, 4mm-100mm Thickness, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Grades |
304,304L,316,316L,316Ti,310,405, 409, 409L, 410, 410S, 415, 416, 430, 431, 439, 436, 436L, 441, 446, 430Ti, 409M, 410DB, 420, Duplex 2205, 2207 |
Sheet Standards |
ASTM A240 / ASME SA240 |
Surface |
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching, etc |
Crack Test |
Magnetic Particle Inspection (MPI) |
Finish |
Hot Rolled Sheet (HR), Cold Rolled Sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Forms |
Coils, Foils, Rolls, Plain sheets, Shim sheets, Perforated Sheets, Chequered Plates, strips, Flats, Blank (Circle), Ring (Flange), etc. |
Inconel 660, A 286 Alloy Bolt
Thread Type | Full Thread |
Material | High Nickel Alloy steel |
Usage/Application | Industrial |
Shape | Round |
Color | Silver |
Tensile Strength | 965 MPa |
Surface Treatment | Bright Annealed |
Work Temperature | -1 to 80 deg C |
Coating | Zinc Electroplating |
Note: We also provide Bolt, Fasteners, Round Bar, Bars etc
Inconel Pipe 718
Usage/Application | cryogenic storage tanks |
Brand | Imported |
Material Grade | 718 Series |
Single Piece Length | 6 meter |
Tensile Strength | 965 MPa |
Material | Inconel |
Pipe Fluid | Chemical |
Inconel 625 Plate
Grade | 625 Series |
Surface Treatment | Galvanized |
Working Temperature | 1 to 80 deg C |
Material | Inconel Alloy |